Model: ACA400 & ACA500 Reverse Camera Installation Manual FEATURES: ● High Resolution: 1/4” CMOS Color Camera ● Compact Zinc A
8. Run the extension cable to the location of the monitor and connect the other end of the extension cable to the camera. Yellow RCA connected to the
Troubleshooting Symptoms Solutions No video signal appears while reversing the vehicle 1. Check you reverse trigger wire for your monitor. 2. Check
11
TABLE OF CONTENTS Warnings 2 Product Description 4 Packing List 5 Camera Installation 6 Camera Wiring Diagrams 9 Troubleshooting 10 1
Warnings The product is intended to assist in safe driving and to allow the driver to have a broader rear view while the vehicle is in reverse. You,
1. This product utilizes high voltage. Any unauthorized modifications or damage to the product may result in electrical shock. Handle all components
Product Description This revolutionary camera design integrates a backup camera with your vehicle. The camera is easy to mount on your car, truck, or
Packing List ACA400 • 1 piece CMOS Camera − 1 qty • 1 piece Hardware pack with nut and retainer clip • 1 piece 22mm Hole Saw • 1 piece Power cable • 1
Camera Installation Look for a location that will give you the best view behind the vehicle. This should not be directly next to or under a reverse/
1. After selecting a mounting surface, either remove the panel if possible or tape off the area to be drilled with masking tape in order to protect t
6. Use the included hardware to secure the camera in place. DO NOT OVERTIGHTEN the hardware. 7. Wire the Camera’s power wire to the vehicle’s reve
Comments to this Manuals