Audiovox Portable CD System User Manual

Browse online or download User Manual for CD players Audiovox Portable CD System. Audiovox Portable CD System User's Manual [en]

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
TAPE PLAYBACK
1. Silde the FUNCTION selector to TAPE.
2. Insert a cassette tape.
3. Press the PLAY button.
TO STOP PLAYBACK
Press the STOP button.
TO FAST WIND
Press the F.FWD or REWIND button.
OR
Press the STOP button to stop winding at the desired position.
RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1. Insert a cassette tape.
2. Prepare the source to be recorded and play it.
Press the STOP button to stop winding at the desired position.
3. Press the RECORD button which also engages the PLAY button .
TO STOP RECORDING
Press the STOP button.
WHEN THE END OF THE TAPE IS REACHED
The tape stop and the buttons are released. To record on the other side, turn
the cassette over and press the RECORD button again.
TO ERASE A RECORDED TAPE
1. Slide the FUNCTION selector to TAPE.
2. Insert a tape with the side you want to erase facing you.
3. Press the RECORD button to start erasing.
USING THE CASSETTE
Recording from a CD
(Refer to using the CD player)
OR
Recording from the radio
( Refer to radio operation )
- 7 -
GENERAL
Power consumption: 12 W
Power source: AC 120V ~ 60Hz
AC 220V ~ 50Hz (China)
AC 230V ~ 50Hz (Europe & Hong Kong)
AC 240V ~ 50Hz (Australia)
DC 12 V (8 x "C" size or UM-2 batteries)
Specifications subject to change without notice.
CARE & MAINTENANCE
- 8 -
HANDLING THE COMPACT DISC
It's important that you periodically clean the
laser lens:
1. Turn off the unit's power and disconnect the
AC power.
2. Open the CD door and remove the disc.
3. Clean the lens with a soft cloth or use an air
blower brush designed for cameras.
4. If you still are not able to remove dirt
particles, moisten a cotton swab with
isopropyl alcohol and gently apply to the
face of the laser lens, rubbing gently until
all traces of dirt are removed.
Although the music tracks in the disc are covered with a protective layer, it
is still advisable to treat the disc carefully. Always pick up discs by the edge
and put them back in their holders immediately after use.
CLEANING THE TAPE HEADS
Clean the head with a cotton bud slightly
moistened with cleaning fluid or denatured
alcohol.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft
cloth.
IMPORTANT NOTICES
Should the CD door be opened before the reading of the CD is completed,
a jamming noise may occur. This can be resolved by closing the CD door
and then sliding the FUNCTION switch temporarily to TAPE.
If an abnormal display indication or an operating problem occurs, disconnect
the AC power cord and remove the batteries. Wait at least 5 seconds, then
reconnect the AC power cord or reinstall the batteries.
Laser lens
CD
Problems
System does not turn
on
Disc in place but unit
won't play
Solutions
Make sure AC power plug is secure in the outlet
and inlet has power.
Batteries may be dead. Install new batteries.
Make sure the FUNCTION selector is set to CD
position.
Make sure disc is clean and undamaged.
Make sure printed side of disc is facing up.
Make sure PAUSE mode is not activated.
Make sure the unit is on a secure spot. Vibration
or jarring can cause the disc to skip.
TAPE
Problems
Distorted or noisy
recording
Record button won't
depress
Solutions
Tape heads are dirty; clean them.
Tape is damaged. Try another tape.
Tabs on edge of cassette may be missing or broken.
If you want to record on that cassette, cover the
holes with removable tape.
Solutions
Make sure FM antenna wire is fully extended.
Electrical interference in your home can cause
poor reception. Move the unit away from them
(especially those with motors and transformers).
Reposition or turn the unit for better reception.
TROUBLE SHOOTING GUIDE
RADIO
Problems
Poor FM reception
Poor AM(MW)
reception
- 9 -
Printed in China - 10 - 811-179391-011
SPECIFICATIONS
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The lightning flash
and arrowhead within
the triangle is a
warning sign alerting
you of "dangerous
voltage" inside the
product.
The exclamation
point within the
triangle is a warning
sign alerting you of
important instructions
accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
Do not use the unit in places which are extremely hot, cold, dusty or humid.
 Place the unit on a flat and even surface.
 Do not restrict the air flow of the unit by placing it in a place with poor air
flow, by covering it with a cloth, or by placing it on a carpet.
ON SAFETY
 When connecting and disconnecting the AC cord, grip the plug and not the
cord itself. Pulling the cord may damage it and create a hazard.
When you are not going to use the unit for a long period of time, disconnect
the AC power cord.
ON AC VOLTAGE
Before use, check that the rated voltage of your unit matches your local
voltage.
When there is condensation inside the unit, the unit may not function normally.
Let it stand for 1 to 2 hours before turning the power on, or gradually heat the
room up and dry the unit before use.
FCC INFORMATION
This device complies with part 15 of FCC Rules. Operations are subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesirable operations.
Should any trouble occur, disconnect the AC power cord and refer
servicing to qualified personnel.
This product contains a
low power laser device.
CLASS 1
LASER
PRODUCT
CAUTION
INVISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM
PRECAUTIONS
CLASS 1 LASER PRODUCT
OPERATING
INSTRUCTIONS
Capstan
Pinch roller
Record /
playback head
Erase head
Page view 0
1 2 3 4 5 6

Summary of Contents

Page 1 - PRECAUTIONS

TAPE PLAYBACK1. Silde the FUNCTION selector to TAPE.2. Insert a cassette tape.3. Press the PLAY button.TO STOP PLAYBACK Press the STOP button.

Page 2 - .5V1 .5V1

NAMES OF CONTROLS1. Cassette deck operation controlsSTOPF.FWDREWPLAYRECORD2. DISPLAY3. TUNING/CD SKIP buttons4. Cass compartment5. MEMORY button6. FUN

Page 3 - Instrucciones

UTILISATION DUMAGNÉTOCASSETTE- 7 -CUIDADO Y MANTENIMIENTO- 8 -Laser lensGUÍA DE SOLUCIONES- 9 -- 10 -ESPECIFICACIONESPRECAUCIÓNProducto láser de Clase

Page 4 - SUMINISTRO

IDENTIFICATION DES COMMANDES1. Controles de operación de la caseteraSTOPF.FWDREWPLAYRECORD2. DISPLAY3. Teclas TUNING/SKIP4. Compartimiento para casete

Page 5 - FONCTIONNEMENT

UTILISATION DUMAGNÉTOCASSETTE- 7 -PRÉCAUTIONS ET ENTRETIEN- 8 -Laser lensGUIDE DE DÉPANNAGE- 9 - Imprimé en Chine

Page 6 - FONCTIONNEMENT DE LA RADIO

IDENTIFICATION DES COMMANDES1. Commandes du magnétocassetteARRÊTAVANCE RAPIDEREMBOBINAGELECTUREENREGISTREMENT2. AFFICHAGE3. SYNTONISATION/SAUT POUR CD

Comments to this Manuals

No comments