2.4GHz Digital Spread SpectrumDual Handset Cordless PhoneTéléphone numérique sans fil 2.4GHzà identification de l'appelant et haut-parleurTeléfon
E - 9Install base unit & additional handset in a location where:- Away from electrical appliances, such as computer, TV, microwave ovens, wireless
E - 10HANDSET SECTION1) RECEIVER2) DISPLAY3) OFF HOOK / YES / FLASH KEY4) INT / REDIAL / PAUSE KEY5) ON HOOK / NO KEY6) SCROLL KEYS 5/67) DIAL KEYS /
E - 11USING THE MENU SYSTEMThe user interface has been designed with simplicity of operation in mind. Functions thatare not available from the keyboar
E - 12TELEPHONE OPERATIONANSWERING AN INCOMING CALLInternal callWhen the internal call comes ,the display shows the identity (ID) number of thecalling
E - 13Last Number RedialIn the on hook mode, press the REDIAL (INT/PAUSE) (4) button to show the last dialingnumber on display.The user can select up
E - 14MEMORY OPERATIONThis describes how memory is managed - how numbers are added, removed and edited.All of these memory functions use the menu syst
E - 15MEMORY OPERATIONDELETING A MEMORY ENTRYMemory deletion is considerably simpler than adding new memory entries.• Enter Phonebook mode by pressing
E - 16CALLER ID OPERATIONThese calls can also be dialed out and stored into the phone book.Remark: To use the caller-ID operation, you have to subscri
E - 17CALLER ID OPERATIONDELETE ALL CALL RECORDS• Press scroll keys 5/6(6) to select “CLI RECORD”, then YES (3) to confirm.• Press scroll keys 5/6(6)
E - 18TELEPHONE SETTINGSRINGER VOLUMERinger volume is set by following procedure.• Press scroll keys 5/6(6) to select “RINGER” and press YES (3) to co
E - 1CONTENTSIMPORTANT SAFETY INSTRUCTIONS ... 2-3BATTERY CAUTIONARY INSTRUCTIONS ... 3IMPORTANT ELECT
E - 19TELEPHONE SETTINGSKEYPADThere are two user options for the keypad,The keypad can be locked to prevent unintended operation• Press scroll keys 5/
E - 20TELEPHONE SETTINGSNote that if Caller ID service is activated, this service will reset the time at everyincoming call.FORMAT SETTING (12 HOUR)•
E - 21Handset could be set to walkie-talkie mode. In walkie-talkie mode, handset couldcommunicate with other handset even the base is unavailable.ENAB
E - 22ANSWER WALKIE-TALKIE CALL.• Press YES (3) to answer the call.Both handsets have to be set to walkie-talkie mode before talking walkie-talkie cal
E - 23OTHER FUNCTIONDIALING MODEThe dialing mode (DTMF/ Pulse) in base is decided by handsets independently.• Press scroll keys 5/6(6) to select “ADVA
E - 24TROUBLE SHOOTING GUIDEIn the event of your telephone NOT working or difficulty in opening, the followingsuggestion can be help you of solving th
E - 2590 DAY LIMITED WARRANTY From No. 128-46481-800-252-6123AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser
E - 2IMPORTANT SAFETY INSTRUCTIONSPlease take a few moments to read the following instructions for your safety and toensure that you get the maximum b
E - 3BATTERY CAUTIONARY INSTRUCTIONSCAUTIONRisk of explosion if battery is replaced by an incorrect type.Replace only with the same type recommended b
E - 4Unplug all electrical appliances when you know an electrical storm is approaching.Lighting an pass through your household wiring and damage any d
E - 5An applicable certification jacks Universal Service Order Codes (USOC) for the equipment is provided(i.e., RJ11C) in the packaging with each piec
E - 6IMPORTANT ELECTRICAL CONSIDERATIONS“This product meets the applicable Industry Canada technical specifications.”Before installing this equipment,
E - 7INTRODUCTIONTELEPHONE FEATURES• Operating in 2400 MHz ~ 2483 MHz.(ISM band) with 45 Channels• Digital Spread Spectrum Technology (Frequency Hoppi
E - 8INSTALLATIONLINE CORD CONNECTION :Plug the telephone line cord into the modular jack on the back of the telephone base andthe other end into the
Comments to this Manuals