Audiovox PSS100 - Standard Rear Only System Installation Manual

Rear Parking Sensor System Model: PSS100 Installation Manual TABLE OF CONTENTS Warnings...

Mounting the Control Module Determine a dry place inside the vehicle (out of the way) to mount the control module (e.g., behind an inner body panel),

Specifications Power Supply DC9V-DC16V Current Draw <120mA Detecting Distance 0ft – 5ft Sensor Cable Length 19.68ft (6M) Operating Temp

11

© 2009 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppage, NY 12

Features • Two reversing sensors detect obstacles up to 5 feet • Upgradeable to a 4 Sensor system (requires part #: PSS200) • Includes 0°, 4°, 8°

Warnings This product is intended to assist in safe driving by signaling the driver of obstacles behind the vehicle while the vehicle is in reverse. Y

Product Description This Rear Parking Sensor System is designed to assist the driver by providing an alert when an object is behind the vehicle whenev

Installation Instructions Before installing this product, take time to familiarize yourself with the items in the box and use the packing list to ver

Marking and Drilling Holes Figure 1 (2 sensors) Figure 2 (4 Sensors) 1. Mark the locations of the sensors on the rear bu

Installing the Sensor Sleeve and Sensors NOTE: When installing the sensors into the sensor sleeves, push on the outer ring of the sensor only. Never p

Installing the Power Harness Tap/Run Connection 1. Wire the Power Harness to the vehicle’s reverse lamp. a) Locate the reverse lamp in the ta

Mounting the Speaker The speaker has three volume settings: Off, Hi, and Low. Since the speaker can be adjusted as needed, you should mount the speake