Model APS-785Owner's Manual4 Button Remote Start Security System WithPlug-In Shock Sensor & Starter DisableFEATURES:w 2 Four Button Programma
ALARM DASH LED INDICATORSRAPID FLASHING = PASSIVE ARMINGSLOW FLASHING = ARMEDOFF = DISARMEDON SOLID = VALET MODE3 FLASH... PAUSE = INTRUSION ZONE 32 F
Page 2Your APS-785 Remote Start Alarm System has many features and available options some ofwhich are selected at time of installation. For your refe
entry points are closed, the arming cycle will begin again.At the end of the 30 seconds, the parking lights will flash once, the siren will chirp once
Page 4SILENT DISARMING1. As you approach the vehicle, press and hold the Arm/Disarm button of your key chaintransmitter for two seconds.The parking
Page 51. Enter the vehicle, and turn the ignition key to the on position.2. Press and hold the valet pushbutton switch until the dash mounted LED turn
Page 6Custom Code Programming Example:To Change the code from the factory pre-assigned code of 11 to “52” you would do thefollowing:1. Disarm the syst
Page 74. If the chirps were on before you started, the siren will emit 2 short chirps indicating thatthe chirps are now off. If the chirps were off b
seconds. The vehicle will start and remain running for the pre-programmed 5, 10, 15, or20 minutes. As a visual indication, the parking lights will
ADDITIONAL REMOTE FUNCTION CHANNEL 3The system has an additional feature, (Channel 3) ,that can be connected to a number ofdifferent optional accessor
Comments to this Manuals