Audiovox PRO9801C User Manual download pdf

128-6799C

1 of 8

Your Alarm and or Remote Start unit has a configurable receiver that allows

the transmitter to be programmed to operate the Lock Unlock functions with

one transmitter button or with two transmitter buttons (separate Lock/

Unlock). In addition, the receiver also allows driver priority function. This

driver priority function takes place when ever a particular transmitter is

used to unlock the vehicle regardless of the selection of one button or two

button operation.

The following indicates the receiver programmable slots.

1 Lock/Unlock or Lock

2 Unlock if Programmed

3 Trunk Release & or Remote Start (Optional on some models)

4 Auxiliary Output

5 Auxiliary Output

6 Driver 1 Priority or Sperate Output

7 Driver 2 Priority or Separate Output

Receiver channels 6 or 7 will accept the programming of transmitter

channel 1 if used as the Lock/Unlock button, or Channel 2 when separate

Lock Unlock buttons are programmed. In this way, whenever the transmit-

ter is used to unlock the vehicle, channel 6 or 7, when programmed, will

provide a pulsed ground output. This output can be connecter to the driver

priority function of the vehicle to reset preset user features. Please consult

with your installation centers technician to see if this feature is available in

your vehicle.

NOTE: A total of 4 transmitters may be programmed into any receiver

channel.

Force programming a transmitter, removing a transmitter, or reprioritizing a

transmitter is covered later in this manual.

Also, if you do not program a transmitter button into channel 2 which is the

separate unlock/disarm channel, then whatever button is programmed into

channel 1 will serve as both lock/arm & unlock/disarm.

Note: The RED Button serves as a function button in combination with other

buttons explained in your owners manual. This button may not be used to

operate a receiver channel.

NOTE: The Option Button is predetermined and programmed for access to

Time Start, and Temperature Start & Check so it cannot be used for multiple

button operation of any other feature. It will however operate for any single

button programming.

This transmitter is also capable of one button programming for certain model

Audiovox Alarms. If your alarm is one of these models, then when step 3 is

completed on the following page, you can turn the ignition switch off and

Rev B to show use of PBLED 6/06

Rev C to add 5BCR07, 5/07

Model 5BCR/5BCR03/

5BCR05/5BCR07

Programming Guide

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - 5BCR05/5BCR07

128-6799C1 of 81Your Alarm and or Remote Start unit has a configurable receiver that allowsthe transmitter to be programmed to operate the Lock Unloc

Page 2 - 128-6799C

128-6799C2 of 82programming with the default button configurations for the first four chan-nels will be complete.TO ENTER THE PROGRAM MODE:1. Turn the

Page 3

128-6799C3 of 8310. Within 10 seconds, press and release the valet program switch onetime.(Siren emits 5 short chirps indicating channel 5 has been en

Page 4

128-6799C4 of 84to use, and all others are erased, you will have to fill all four receiver slots.If in step 3 you identified one transmitter, you will

Page 5

128-6799C5 of 85To replace the transmitter battery:1. Slide back the lock tab on the back side of the transmitter case in the directionshown.2. Slid

Page 6

128-6799C6 of 86Attention: Transmitter Ordering DepartmentImportant: To help us expedite your order, please print all of the informationlegibly and m

Audiovox PRO9801C User Manual

Browse online or download User Manual for Security access control systems Audiovox PRO9801C. Program Guide [en]

Summary of Contents

Comments to this Manuals

Audiovox PRO9801C User Manual

Browse online or download User Manual for Security access control systems Audiovox PRO9801C. Program Guide [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Security access control systems Audiovox PRO9801C