Audiovox Prestige 128-8602 User Manual download pdf

128-8602

1 of 8

Model APS-45N

Installation Manual

Keyless Entry System

With Two Auxiliary Outputs

Installation Instructions

This Unit Is Intended For Installation In Vehicles With

12 Volt Negative Ground Electrical Systems Only.

Kit Contents:

 (1) Control Module

 (2) - Four Button Transmitters

 4 Channel Code Learning Receiver

 On Board Antenna

 (1) - Multi Pin Input/Output Harness

 (1) - Three Pin Door Lock Harness

 (1) - Two Pin LED Indicator

 (1) - Two Pin Valet / Override Switch

 (1) - 15 Amp In-line Fuse Holder With Fuse

 (1) - 5 Amp In-line Fuse Holder With Fuse

 (1) - Installation Manual

 (1) - Operator's Manual

 (1) - Limited Warranty

 (2) - Window Decals

1 2 3 4 5 6 7 8

128-8602 1 of 8Model APS-45NInstallation ManualKeyless Entry SystemWith Two Auxiliary OutputsInstallation InstructionsThis Unit Is Intended For Insta

128-8602 2 of 8This Keyless Entry System is designed to provide a convenient electronic means to gain access to the vehicle byproviding RF remote con

128-8602 3 of 8directly to the vehicle's positive parking light circuit. Once the wire is located, confirm that all the vehicle's parking

128-8602 4 of 84GREEN/BLACK Wire: Immediate, 300mA Duration of Transmit, Channel 3 OutputThe Green/Black wire supplies a 300mAswitched output whenev

128-8602 5 of 85the red wire to the wire that provides a low current positive signal from the factory door unlock switch to the factory door lockcont

128-8602 6 of 86Programmable Features:Features 1 Chirp 2 Chirp 3 Chirps DefaultFirst Passive Arming Active Arming Active ArmingSecond Ignition D/L ON

128-8602 7 of 87Fourth Turn the valet switch on then off 1 chirp = chirps on 4 Flash pausePress transmitter Lock button to change 2 chirps = chirps o

No comments

Audiovox Prestige 128-8602 User Manual