WAN LAN
reset
power
LAN
WAN
POWER
LAN
LAN
LAN
RIR205
QuickStartGuide
Congratulations on purchasing your new RCA Wi-Fi Internet Radio.
Please follow these instructions to set up and start using the radio.
www.rcaaudiovideo.com
v1.0 (EN)
Unpack the unit
You should nd the following items in the box:
Additional requirements
• Broadband Internet service
• Broadband (cable/DSL) modem, usually supplied by your Internet service provider
• Ethernet router/switch/hub with available LAN port
Setup your RCA In nite Radio accounts
To simplify setup and avoid manual con guration on the radio please complete these steps:
1. Find the Setup Information Card that contains your radio’s MAC address number (MAC:
00-00-00-00-00-00) and activation PIN # (PIN: 0000). (This number is also found in the Device
Info screen under the Settings menu in your radio.)
2. Using any Internet-connected computer, go to www.rcain niteradio.com/setup and follow
the online instructions.
• You will need to input your radio’s MAC address and PIN # to associate your radio with your
personal settings.
Wi-Fi Enabler
Connect the RCA Wi-Fi Enabler to your network
Insert AAA batteries in the base of the radio
Broadband modem or
Ethernet router/hub/switch
1. Connect an ethernet cable from the Enabler’s “WAN” port to a LAN port on your broadband
modem or Ethernet router/hub/switch.
2. Connect the power adapter to the Enabler. Plug the adapter into an electrical outlet.
3. Make sure the power, WAN, and Wireless LEDs are on. The mode LED state will vary depending
on your network con guration. If the Mode, WPS/Scan, and Wireless LEDs are blinking
simultaneously, this indicates that there is a possible error in connection. Please review your
connections and then press and hold the WPS/Scan button at the front of the Enabler for 3
seconds to rescan your network con guration. Go to www.rcain niteradio.com/enablersetup
for more information.
Follow the polarity markers in the battery
compartment.
The batteries (not included) power the
clock and alarm whenever the radio loses
electricity.
Plug in and turn on the radio
1. NOTE: When you turn on the radio for the rst time,
it will be in “DEMO” mode. To exit this mode, press
preset 1, then SLEEP/SNOOZE, then preset 6 on
top of the radio.
2. After exiting the DEMO mode,
the radio displays the Select
Language screen. Choose
your preferred language.
• REMINDER: If your unit is unable to connect to
your Enabler and you have already checked all the
connections to the enabler, please press and hold
the WPS/Scan button at the front of the Enabler
for 3 seconds to rescan your network con guration.
Go to www.rcain niteradio.com/enablersetup for
more information.
3. If you did not activate your In nite Radio accounts,
or if the radio cannot get your details from the
In nite Radio server, the radio may ask for your ZIP
code. Input your code.
• If your radio has successfully connected to the Internet you will hear a welcome message.
Quick Start
Guide (this
lea et)
Use the navigation controls to make
choices and input information:
- move highlight up
- move highlight down
- move selection/navigate left
- move selection/navigate right
SELECT - con rm selected option or
character
When inputting characters, press or
to choose among uppercase, lowercase,
numeric, or special characters.
To insert spaces or correct mistakes, press
to display the Commands list and then
press or to choose the desired
command.
Learn more about your Internet Radio
Read the user manual (download from www.rcain niteradio.com) for more information on the
player’s features, safety and warranty information, and answers to Frequently Asked Questions (FAQ’s).
Need more help? Do not return this product to the store.
Visit www.rcain niteradio.com to get the latest rmware updates and FAQ’s.
Radio
Power adapter
(for radio)
Power adapter
(for Wi-Fi Enabler)
Ethernet cable
AM loop antenna
Setup
Information
Card
Electrical outlet
Electrical outlet
Press preset 1, then SLEEP/
SNOOZE, then preset 6.
Deactivate the DEMO mode
after turning on
If your modem or router/hub/switch has only one LAN
port and is connected to your PC, disconnect the
Ethernet cable from the modem/router/hub/switch and
connect it to the Enabler's LAN port.
Press or to highlight,
SELECT to con rm.
Press
to show “DONE”
and SELECT to con rm.
2
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals