Model APS-995Owner’s ManualIMPORTANT ! In order to provide you with the highest level of security to yourvehicle, this system is equipped with selec
3. Stage 2 (Omit pre & full detect)In this mode, both the pre-detect stage, and the full trigger stage of the sensorare defeated. The unit will n
To Remote Start The Vehicle:Press and release the programmed channel of your keychain transmitter two timeswithin 2 seconds. The vehicle will start a
CANCELING THE AUTOMATIC START UP TIMERTo cancel the automatic start up timer do one of the following;1. Start the vehicle manually with the use of the
ADDITIONAL REMOTE FUNCTION ( CHANNEL 5 )Controlled By: o Trunk/Key Button o Option Button o Lock + Unlock Buttons o Lock+ Trunk/Key Buttons o Lock +
Page 14This security system has an additional feature that can be connected to a number ofdifferent optional accessories. Some of the more common uses
Page 15When the Remote Start Function has been Operated, The three exhaust barsturn "ON", on the LED screen. Once the vehicle is running, t
Triggered and entry attempt was made to the vehicles hood or trunk.Triggered and entry attempt was made to the vehicles glass, or the vehicle hasbeen
ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE:If the arm/disarm chirp tones have been turned off at the vehicle, when you arm,or disarm, the display will
ADDITIONAL REMOTE FEATURES:The two way remote control unit allows you to access information from thevehicle, light the display, and toggle the transmi
APS 995SYSTEM FUNCTIONS AT A GLANCEDASH LED INDICATORSRAPID FLASHING = PASSIVE ARMING/ACTIVEREARMINGSLOW FLASHING = ARMEDOFF = DISARMEDON SOLID = VAL
Page 2w Starter Disable Outputw Additional Engine Immobilizer Output, (Optional Relay Required)w True Last Door Arming (Hardwire Only)w Defective Zone
© 2001 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, NY 11788128-6165
Page 3If your transmitter button is pressed more than fifty times while it is out of range ofthe vehicle (children playing with your keys), the transm
Page 4Note: If the optional Headlamp illumination feature has been added, and hasbeen selected for operation when arming, as an added convenience, the
Page 5DISARMING THE SYSTEMNote: If the optional 2 step door unlock circuit is installed, when the unlock transmit-ter button is activated, the drivers
Page 6þ Siren will not sound.If the siren sounds 4 chirps, then the alarm was triggered in yourabsence. Before turning the key on, examine the LED and
Page 7MANUALLY OVERRIDING YOUR SYSTEM:USING THE VALET SWITCH MANUAL OVERRIDEYour Security System can be disarmed without the use of the keychain trans
Custom Code Programming Example:To Change the code from the factory preassigned code of 11 to “52” you would dothe following:1. Disarm the system by u
ELIMINATING THE NORMAL ARM / DISARM CHIRPSAs explained earlier in the manual, you can eliminate the chirps selectively anytime you arm or disarm the s
Comments to this Manuals