Audiovox VOD285S - Dual LCD Monitors Installation Manual download pdf (Page 3)

MM92HR System

The MM92HR system consists of two headrests each with a 9.2" LCD monitor. An additional DVD player (Audiovox AVD400A or MMDV5

or similar) is required in order to view DVD videos on this system. Alternatively, a gaming system can be used as a video input to play

video games. In either case, it is recommended that a video amplifier (such as Audiovox VA100) be used to eliminate video signal

loss which can result in poor picture quality.

In addition, 2-channel wireless IR (Infra-Red) headphones (Audiovox IR2CHS or similar) may be purchased to allow listening to the

system without wired headphones.

Quick Start Guide

1. Turn on the video source (DVD player, game, etc.).

2. Press the Power button on the monitor.

Note: When the DVD player or source is turned on, it will automatically turn on the headrest monitor if the monitor is set to AV1

input.

3. Press the AV button to view the video source. (If there is no video displayed or video source selected, the monitor will turn off.)

a. AV1 source is the DVD player, game, etc.

b. AV2 is the AV2 input on the front of the monitor next to the headphone jack. Use the supplied adapter to input a video

game or other video source.

4. When using the optional wired headphones, plug the headphones into the headphone jack on the front of the unit.

5. When using the optional 2-channel (A/B) wireless headphones, each headphone has an A/B switch on it. The monitor can be

set to broadcast on channel A (2.3MHz/2.8MHz), or channel B (3.2MHz/3.8MHz. (Refer to the Monitor Operation section to set

the Infrared transmitter to either channel A or channel B.)

1 2 3 4 5 6 7 8 ... 13 14

No comments

Audiovox VOD285S - Dual LCD Monitors Installation Manual Page 3