TV55 Owner’s ManualIndoor/Outdoor Amplified TV Antenna
9Mounting the TV55 Antenna (continued)Outdoors using Window Mounting: 1. Locate:(1) Channel Insert(2) 3/4" bolts(2) Hex-head nuts(2) Split washer
103. Insert a hex-head bolt into each of the Channel Inserts. Insurethat the bolt head fits into the hexagon recess on the insert.4. Slide the Channel
11Mounting the TV55 Antenna (continued)7. Determine the location on the window where the TV55 will be mounted.8. Attach the Window Frame Brackets to t
12Outdoors using Mast Mounting:1. Locate:(1) Channel Insert(1) Mast Mount Base and Cover(1) 1 1/2" hex-head bolt(1) 2 1/2" hex-head bolt(1)
13Mounting the TV55 Antenna (continued)4. Determine mast size. The supplied Mast Bracket will fit a 1 1/4" or 1 1/2" mast. If the mast being
14Connecting the TV55 to a TV1. Run the RG6 coaxial cable from the antenna towards yourtelevision set and connect the RG6 coaxial cable to the supplie
15Running CableUnder a Window:1. Connect one end of the supplied RG6 coaxial cable to the “F”-connector output on the end of the TV55 and connect the
16Water Damage Prevention:At the point where your coaxial cable lead enters the house, youshould allow for some slack in the coaxial cable as a “drip
17For Use With a Satellite DishTV55 Installation Procedure for use with a Satellite DishIf you have a satellite dish it is possible to install the TV5
18Trouble Shooting Q. I am not getting any channels above channel 13.A. Most TV’s today are cable ready. When a cable ready TV is in theCABLE or CATV
1Safety PrecautionsWarning! Use extreme caution when installing or removing an outdoorantenna that is located close to overhead wires such as powerlin
Limited WarrantyAudiovox Corporation (Audiovox) warrants this product against defects inmaterials or workmanship for one (1) year from the date of pur
2Please read and follow these important safety precautions: • Be sure to select an antenna site well away from all overhead wires.• Do not try to gues
3About Your New TERK TV55 Antenna Your TERK TV55 antenna is designed for both single and multi-family homes. It’s specifically engineered to provide s
4(2) Window Mount Brackets (2)-piece assembly consisting of: (1) Window Frame Bracket (1) Channel Insert Bracket)(2) Wall-Mount Cam-locks(1) 7.5"
5Positioning the TV55The TV55 MUST be mounted horizontally (See Fig 1.); with thefront of the TV55 facing the general direction of the TV station’sbro
6On the side of the house facing the broadcast towerNot on the side of the house facing the broadcast towerTV55RightWrongFig 2.
7Mounting the TV55 Antenna Mounting Options:The TV55 can be mounted in many ways both indoors (such as ona wall or in an attic) and outdoors (such as
83. Use the #10 screws and plastic anchors to secure each of theWall-Mount Cam-lock units into the wall at the marks made inStep #2. (As an alternativ
Comments to this Manuals