Audiovox PAV2000DTV Installation Guide download pdf (Page 30)

SYSTEM OPERATION

Turning The System Power ON/OFF

To turn the system power ON, press and release the POWER button. The monitor will be

vertically positioned when pressing Open/Close button.

Pressing and releasing the Open/Close button can also turn ON the system power.

To turn the system power OFF, press and hold the POWER button again for 2 seconds. The

monitor will automatically close when the unit is powered OFF.

Opening The Monitor

Press the OPEN/CLOSE button to open the monitor.

Closing The Monitor

1. Hold the upper left & right side of the monitor parallel with the front of the unit as shown

in the picture below.

2. Press the OPEN/CLOSE button or POWER button for 2 seconds or longer and the

monitor will automatically close.

NOTE:

• If the monitor is not parallel to the front of the unit (the monitor is angled to the

left or the right) the monitor cannot be closed. A beep tone will alert the user to

the problem.

• If the OPEN/CLOSE button is pressed while radio or video is on, the monitor

will close, and sound will still be audible. When pressing power button for 2

seconds, the sound and power will be “OFF”.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

No comments

Audiovox PAV2000DTV Installation Guide Page 30