Audiovox XMB10 User Manual download pdf (Page 8)

128-7546

8 of 16

-8-

b.After making sure the connectors and guide pin hole

are properly lined up, gently lower the Xpress into

the mounting plate, and press down on the Xpress

to mate the connectors together. The raised detent

on themounting plate will enter the notch on the

rear of the Receiver, indicating the Xpress is properly

seated. The receiver should now be attached

securely to the mounting plate.

c. Apply power to the XMB10 by pressing the Power

ON/OFF button; the LED indicator lightsblue. If

the Receiver does not turn on at the same time,

press the Power On/Off (

) button on the Receiver

front panel.

4.Removing the Receiver From the XMB10

Press the EJECT button on top of the Boom Box; the

receiver will swing out automatically. Gently grasp each

side of the Receiver at the top and pull straight up to

disengage it from the mounting plate.

INSTALLING/REMOVING

THE Xpress RECEIVER

Xpress

RECEIVER

INSTALLED

PUSH IN AT TOP TO

SECURE IN PLACE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Audiovox XMB10 User Manual Page 8