Audiovox VDS102T Installation Guide download pdf (Page 11)

~9~

Negative Switched Dome Lighting

Red / black - Lamp on

To 12 pin

connector

constant

Black / red - Lamp common

Purple / brown - Lamp Auto

Factory Door ajar

switch or Body

Control computer

Troubleshooting:

SYMPTOM: REMEDY:

Note:

No power at Video Monitor

Power but no video or sound

Static on TV Stations

No Infrared remote functions

Verufy +12 VDC on Red wire at 2 pin Power Harness behind video

monitor. Verify ground connection with continuity test from known good

ground to black wire at 2 pin Power Harness

Verify that the correct source is selected (i.e.: 1,2,3 or 4). Verify that the

source is on and playing a known good media (such as a videotape).

Verify connections at both ends of the source component harness.

Press Auto Program button. Then press CH up or CH down.

Due to the nature of TV signals, vehicle motion, direction the

vehicle is facing, distance from the transmitter, nearby surroundings and

weather may adversely affect TV reception. These conditions may result

in the following: picture roll, "snowy" picture, or momentary loss of color.

Check batteries in the hand held remote (not included with this kit). Verify

Verify

antenna mounting and connections to the tuner.

that the IR LED ( page 7 Wiring Diagram) is properly attached to the

sensor window of the VCP (or other component).

(Tuner Version Only)

for VCP (or other components)

1 2 ... 6 7 8 9 10 11 12

No comments

Audiovox VDS102T Installation Guide Page 11