Audiovox FPE709 User Manual download pdf (Page 12)

Setting Up Channels

You must scan for available digital channels when you setup your TV.

If you do not scan for channels, the Channel Up and Down buttons

will not function.

To scan for channels:

1.Turn on your TV and press the SOURCE button to set the input

to TV.

2.Press MENU. The Menu screen appears.

3.Press the RIGHT button twice to access the Channel Setup

menu.

4.Select Auto Scan. Then choose Start to Scan. The TV begins to

scan for available channels. You can interrupt the scan by press

ing the MENU button.

5.When the scan is complete, you can adjust the antenna, select

Auto Scan Add CH to add more channels to those scanned.

6.Press MENU again to exit the setting menu.

Selecting Digital Channels

You can select specific digital TV stations using your remote control.

To select a digital station, enter the channel number followed by “-1”.

For example, enter “11-1” for the digital channel 11. If available, the

digital channel appears.

Some digital stations provide multiple broadcasts on a single channel.

To access these directly, enter higher numbers after the channel

number. For example, “11-2” “11-3” etc. for digital broadcasts of chan-

nel 11. If available, these digital channels appear.

Using External Antenna

If the picture is not clear with the built-in rod antenna, try placing your

TV near a window or connecting an external antenna to the TV to

improve reception. If you are in an area with weak TV signals or inside

a concrete building, you might need an external antenna to improve

reception. The supplied external antenna provides convenience and

flexibility for receiving digital signals.

PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com

1 2 ... 7 8 9 10 11 12 13 14 15

No comments

Audiovox FPE709 User Manual Page 12