Audiovox SIR-HK1 User Manual download pdf (Page 6)

128-6814

6 of 8

7. Mounting the Antenna

The antenna should be placed on a relatively flat

surface whenever possible. To mount the antenna:

a. Plug the antenna into the SAT. (MAIN) connector

on the back of the cradle.

b. Place the antenna at the preferred location

inside or outside the home.

b. You can also place the antenna outside (on the

roof structure), provided it is clear of any

overhead obstructions.

NOTE: Because of the orbiting characteristics

of the Sirius Satellites, the strength of

the received signal may change over

time. In most cases however, the

signal should be available

continuously. If you experience a

loss of signal or audio, reposition the

antenna inside the home or outside

as necessary.

5. Installing the Shuttle on the Cradle

Place the Shuttle in the cradle so that the Shuttle

connectors are lined up; use the SAT and TERR

RF connectors as guides. Then gently press in on

the bottom of the Shuttle to engage the

connectors.

-6-

TERR. RF

CONNECTOR

16-PIN SYSTEM

CONNECTOR

SAT. (MAIN)

RF CONNECTOR

1 2 3 4 5 6 7 8

No comments

Audiovox SIR-HK1 User Manual Page 6