Audiovox Platinum APS-597 User Manual

Browse online or download User Manual for Sensors Audiovox Platinum APS-597. Audiovox Platinum APS-597 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
128-7407
1 of 12
Model APS-597
Installation Manual
SELECTABLE FEATURES
The selectable features can be set manually as explained below, or with the RF feature programmer.
To set features using the RF programmer, follow the instructions packaged with the programmer.
Factory default settings are indicated by bold text.
Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code.
Be certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.
NOTE: Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated.
Also, No data will be indicated if a feature is not available for a particular model. The unit will enter the feature but no selection will be available.
RF Programmable Feature Bank 1 Is For Transmitter Programming See Transmitter Programming Guide.
RF Programmable Features Bank 2 Is Alarm Selectable Features:
Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps Default
1st DoorL/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L Dbl L, 1 Sec UL Dbl L, Dbl UL 1 S l/350mS ul 1S/1S
2nd Accy Lock Accy Lock On Accy Lock Off Auto Locks Off
3rd Accy. UL Accy UL Dr. Accy UL All Accy U/L Off Auto UL Off
4th Headlights On Arm On Disarm On Both Off w/ Arm& Disarm
5th Passive Locks Passive Active Active
6th Pass/Act Arm Passive Arm Active Arm Active
7th Siren/Horn Siren/Horn Siren Only Horn Only Siren/Horn
8th Horn Chirp 10mS 16mS 30mS 40mS 50mS 16mS
9th O/R Method Custom Code Valet Valet
10th 2 Step U/L On Off Off
11th Chp Del Tx On Off Off
12th Volts/HdWire Voltage Sense Hardwire Hardwire
13th Trigger Ckts NA
14th L/UL Poll NA
When using the RF programmer, enter the program mode as follows:
Turn the ignition on
Press and release valet switch 3 times
turn ignition off then on
Press and hold valet switch for 5 seconds
Siren chirps 2 times indicating RF feature program mode.
Note: Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps, or the programming will be terminated.
Page view 0
1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - Model APS-597

128-74071 of 12Model APS-597Installation ManualSELECTABLE FEATURESThe selectable features can be set manually as explained below, or with the RF featu

Page 2

128-740710 of 12Page 10

Page 3

128-740711 of 12Page 11THIS PAGE LEFT BLANK INTENTIONALLY

Page 4

128-740712 of 12© 2005 Audiovox Electronic Corporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788Page 12128-7407

Page 5

128-74072 of 12Page 2To program these selectable features;Action System ResponseTurn ignition on No responsePress and release the valet switch 3 time

Page 6

128-74073 of 12To exit program mode, turn ignition off, or press and release valet switch.RF Programmable Features Bank 3 Is Remote Start Selectable F

Page 7

128-74074 of 12Page 4INSTALLATION OF MAJOR COMPONENTSNote: This system allows the transmitter to be programmed for single button lock/unlock or separ

Page 8

128-74075 of 12Page 5Drill a ¼ “ diameter hole, and pass the red and blue wires from the LED through the hole, from the front ofthe panel. Firmly pres

Page 9

128-74076 of 12Page 6White w/ Black Trace Wire: POSITIVE OUTPUT TO SIRENRoute this wire through a rubber grommet in the firewall, and to the siren loc

Page 10 - 10 of 12

128-74077 of 12Page 7Dark Green Wire: ( - ) INSTANT TRIGGER ZONEThis is an instant on ground trigger wire. It must be connected to the previously inst

Page 11 - 11 of 12

128-74078 of 123 Wire Ground Switched Single Step Door LocksIn this application, the red wire provides a ground pulse during arming, or the pulsed gro

Page 12 - 12 of 12

128-74079 of 12terminal 85 & 87 to a fuse + 12 volt source. Connect terminal 30 to the low current door unlock wire from thefactory door switch t

Comments to this Manuals

No comments