Audiovox POWERED HDMI REPEATER HD588 User Manual download pdf (Page 6)

Powered HDMI Repeater

Repeater Indicators

Status Solution

On Off The repeater is working normally. —

On On

No cable on Display side

No power on Display side

Cable length too long

1. Reconnect the display device

2. Power on the display device

3. Use shorter cables

Off On

Wrong signal direction

No cable on Source side

1. Reverse cable positions on repeater

2. Reconnect the signal source

Off Off

No power on either side

No cable on either side

1. Power on both devices

2. Reconnect both devices

Cable Run Length

How far you can run HDMI cable using this repeater is dependent on the quality

of the cable being used. Standard HDMI cables built with 30-28 gauge conductors

will limit the usable length. The attached components will also affect the length of

the cable run.

When using a well-constructed HDMI cable with better shielding and larger

gauge sizes (such as many AR products), you will be able to transmit the HDMI

signal longer distances without performance degradation. This length will also vary

depending on the quality of the high deﬁ nition component being used.

With better HDMI cables, the typical length improvement will be approximately:

• 1080p – 85 feet

• 720p – 118 feet

When installing this device, it is recommended that the cable length used on the

display side be 85% shorter than the cable length used on the source side.

1 2 3 4 5 6 7 8

No comments

Audiovox POWERED HDMI REPEATER HD588 User Manual Page 6