Audiovox GMRS762CH Owner's Manual download pdf (Page 12)

128-7627

12 of 28

Operating Modes and Features

GMRS Operation:

- From GMRS/FRS standby mode, press and hold the (

) button

for at least 2 seconds to turn on power.

- Press the MODE button so the Channel number flashes.

- Select the desired channel with the Up (15) and Down (13) But

tons. When receiving a call, the

icon appears to indicate the

incoming signal.

- Press and hold the PTT button (3) to transmit, then speak into

themicrophone clearly and slowly. The Transmit Signal indicator

(

) appears on the display.

NOTE: When the transmission is not available with beep tone, the

battery is low; recharge the unit.

When the battery icon is flashing, transmitting is not possible;

recharge the unit.

- Release PTT Button (3) to receive.

- Communication can only be accomplished when the channel and

CTCSS tone frequency of at least two parties are the same.

- The CTCSS small segment display will appear next to the main

frequency channel on the display if the CTCSS tone frequency

function is enabled.

Channel Selection

In order to communicate with other GMRS units, both transmitting and

receiving party must be on the same frequency. The GMRS762CH has

22 channels (frequencies) indicated by the large digits on the LCD dis-

play panel. Channels 1 through 7 are the shared GMRS/FRS channels.

Channels 8-14 are FRS only channels, while channels 15-22 are assigned

GMRS only channels. If an FRS only channel (8-14) has been selected,

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Audiovox GMRS762CH Owner's Manual Page 12