Audiovox 1187001PL User Manual download pdf

INSTALLATION INSTRUCTIONS

FOR

55-0401x-121 SERIES 1187001PL

2001 DURANGO

OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM

These instructions are intended for use only by experienced professionals in the automotive

customizing business. Special tools and equipment, as well as specialized handling and care

of product during installation, may be required. Before beginning this installation, carefully read

through the following instructions. Use extreme care when cutting headliner material.

Check for wiring or other componentry above headliner material. Cut only where indicated.

Materials/ Tools required for this installation:

1. #2 Phillips screwdriver 2. Powered screwdriver or drill with adapter

3. Awl or similar tool 4. Digital Volt Meter

5. 18 GA wire 9' 6. Rubbing Alcohol

7. 5/16” Hex Socket Bit 8. Razor knife or similar

9. Pencil or equivalent 10. Measuring tape

11. Masking tape 12. Audiovox Video Module

NOT FOR VEHICLES EQUIPPED WITH SUN ROOF.

128-6067

Feb. 13,2001

Printed in the U.S.A

INSTALLATION INSTRUCTION # 44-0091A

1 2 3 4 5 6

INSTALLATION INSTRUCTIONS FOR 55-0401x-121 SERIES 1187001PL 2001 DURANGO OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM

Page 2

MATERIALS PROVIDED FOR INSTALLATION: ITEM Description QTY 1 SCREW, #8 X 9/16" PWH 2 2 SCREW, # 10 X 1/2" HWH,TEK

I. PREPARATION OF VEHICLE INTERIOR 1. Remove and retain rear A/C controls by pulling downward. Disconnect wire harness. See Figure 1.

FIGURE 4 4. Carefully pull (3) A/C wire harness clips from roof brace to extend length of wire harness. It may be necessary to lower the driver’s

8. Remove and retain mounting bracket and screws (items 5&3 pg2) from console (item 6 pg2). Use rubbing alcohol to clean sheet metal in the

Page 6

II. INSTALLATION OF CONSOLE

No comments

Audiovox 1187001PL User Manual