Audiovox 50-0263x-019 SERIES User Manual download pdf (Page 3)

REMOVE AND DISCARD (2) TWO SCREWS WHICH SECURE BRACKET TO

HOUSING.

SEPARATE HOUSING TOP FROM HOUSING BOTTOM.

1. Route video and audio cables to passenger’s side

rear of vehicle. Using a razor knife, carefully cut a

slit in carpet to allow cables to pass through. Make

sure wiring will not rub against edge of bracket.

Position VCP mounting bracket (item 3 pg 2)

against side panel and 1 1/8" from back edge of

ledge on side panel as shown. Make sure bottom of

bracket is firmly resting on floor of vehicle. Mark

the center of slot on side panel.

See Figure 1.

2. Carefully drill a 3/8" hole in location previously

marked. CAUTION: Drill through plastic

only, do not drill through sheet metal brace

behind plastic. See Figure 2 .

3. Align slot in VCP mounting bracket with hole

previously drilled. Loosely install (1) one

#8 x 1 1/2" screw (item 1 pg 2) in dimple in

metal brace behind plastic panel.

See Figure 3.

FIGURE 1

FIGURE 2

FIGURE 3

1 2 3 4 5

No comments

Audiovox 50-0263x-019 SERIES User Manual Page 3