Audiovox Rampage ACD88 User Manual download pdf (Page 11)

1111

1111

11

OPEROPER

OPEROPER

OPER

AA

AA

A

TT

TT

T

ING INSTRUCING INSTRUC

ING INSTRUCING INSTRUC

ING INSTRUC

TT

TT

T

IONSIONS

IONSIONS

IONS

Play of the disc can be resumed by using

the MODE button

bu to choose the CD player

function.

cucu

cucu

cu

TIME/FREQUENCY SELECTOR (T/F)

During radio operation, press this button to

call the time display on the incorporated

quartz clock. The current time will appear

together with an A or P indication. The

display will return to the radio frequency

indication after 5 seconds.

During disc play press of this button to call

the time display. The display will return to

the disc indication after 5 seconds.

dldl

dldl

dl EQUALIZER BUTTON (EQ)

The EQ button applies preset sound effects

to the unit’s audio output signal.The EQ

button, when pressed, will activate one of

the following operating modes ( CLASSICS,

POP M, ROCK M, DSP OFF or FLAT). Even

though the Equalizer function is active, as

displayed on the panel, if the bass and/or

treble level is set, the Equalizer function

automatically returns to the FLAT mode.

Conversely, when the Equalizer function is

not active, the unit returns to the user set

bass and treble levels.

dmdm

dmdm

dm RESET BUTTON

The Reset button is located to the right of

the SCN button on the front panel. The reset

circuitry should only be activated under the

following circumstances as it will erase

the time and pre-set memories:

1.Upon initial installation after all wiring is

completed.

2.If there is a malfunction of any of the

switches on the unit, pressing the Reset

button may clear the system and return

to normal operation.

dndn

dndn

dn

FRONT PANEL RELEASE BUTTON

(OPEN)

This button is used to release the

mechanism that holds the front panel to the

chassis. To fold down the front panel, press

the button so that the panel drops to the

lowered position. To reverse the panel and

show only a blank surface, grasp the panel

at the outer edge and press it up into

position. This will give the appearance that

no front panel exists. To return the front

panel to its normal position, press the

release button in the upper right corner of

the blank surface; the panel will then fold

down. Press in on the bottom edge to

reposition the panel in its normal playing

position.

dodo

dodo

do REMOTE SENSOR

The sensor to detect the infrared signal from

the wireless remote control is located behind

the LCD display lens. For optimum operation

of the remote control, always aim the control

at the LCD display.

NOTES ON USE OF FRONT PANEL:

1.When the OPEN button is pressed in the

lower right corner of the front panel, the

panel folds down into the horizontal

position; in this position, compact discs

can be loaded into the CD player. Then

the panel can be returned to the normal

vertical position by pressing inward and

upward on the lower edge of the panel.

2.To reverse the panel surface (the back of

the front panel), repeat step 1 above, and

raise the underside of the bottom edge,

folding the back side of the panel upward

so that the blank side of the panel is

facing outward. Press in until the panel

clicks into place.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments