Audiovox PEQ-200 User Manual download pdf (Page 19)

ULTRA-Q PRO PEQ2200

8.2 Inserting an equalizer in the signal path

The best point to insert the ULTRA-Q PRO in the signal path depends on the task on hand: basically, it can be

inserted in the line insert points of the mixing console, su/jointfilesconvert/378585/bgroup inserts, su/jointfilesconvert/378585/bgroup outputs, effect paths or

between signal processor(s) and mixing console / power amp, etc.

If you use a delay line unit (e.g. used in sound systems with additional room speakers) to make up for run-time

differences, the ULTRA-Q PRO can be inserted either before or after the delay line unit.

If several similar speaker systems are controlled simultaneously (e.g. in a conference room), and if these

systems are positioned at different distances to the stage, you can use a delay line unit with multiple outputs

providing different delay times. In such a case the ULTRA-Q PRO should be inserted before the delay line unit.

In complex sound reinforcement systems comprising different speakers located in varying acoustic

environments (e.g. theaters with front speakers, various side-fill speakers and/or balcony speakers) each

single time-delayed channel should be equipped with a separate ULTRA-Q PRO, as this is the only way to

make provision for varying room acoustic and to adapt the speakers specifically.

8.3 What equalizers cant do

Equalizers are not a miracle cure for poor audio systems, but can be highly useful and efficient audio tools to

musically fine-tune such a system. Fine-tuning often delivers astounding results in terms of acoustic power

and overall sound quality. Equalizers are definitely the most important accessories of your audio system. They

can work wonders when they are used properly, just as the old saying goes:

Its the tone that makes the music!

8. SPECIAL APPLICATIONS

1 2 ... 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Audiovox PEQ-200 User Manual Page 19

Comments to this Manuals