Audiovox UMP9020 User Manual download pdf (Page 8)

UMP9020

8

OPERATING INSTRUCTIONS

- Station Pre-Set Memories

To set any one of the 6 pre-set memories (13-

18) in each band, use the following procedure:

1. Turn the radio on and select a band.

2. Select the first station to be pre-set using

the MANU/SKIP buttons (6).

3. Press and hold the pre-set button (13-18)

to be set for approximately 2 seconds. The

pre-set number appears on the display

panel. The station is now stored and can

be recalled at any time by pressing that

button.

4. Repeat the above procedure for the

remaining 5 pre-sets. Six stations can be

stored for each band.

Display Selector (DSP)

This unit can display either the clock time or

radio frequency/CD player functions. Ordinarily,

the radio frequency or CD player track

indication is displayed, but the unit will display

the time when the DSP button (20) is pressed.

The time will display for approximately 5

seconds then return to the radio or CD player

function display.

Setting the Clock

To set the clock, perform the following steps:

1. Turn the vehicle ignition and radio on.

2. Press the DSP button (20) to display the

clock.

3. Press and hold the DSP button (20) until

the time flashes.

4. Press the Down Tuning ( ) button (6) to

adjust the hours and the AM/PM indication

or the Up Tuning ( ) button to adjust the

minutes.

The adjusted time will remain on the LCD

display for 5 seconds, or until the DSP button is

pressed again.

13 18

20

ULTRASERIES

AM/FM/ CD/MP3/ WMA CASSETTE RECEIVER

UMP9020

/

MANU

SKIP

BAND

LOUD

7

9

8

WMA

CD-

CD+

SHFRPTSCNPAU

AMS

D-AUD

SCAN

MUTE

TAPE OPEN CLOSE

CD OPEN CLOSE EJ

3 in 1 CD/MP3 CASSETTE RECEIVER

0

13 14 15 16 17 18

20

6

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 58 59

Comments to this Manuals

No comments