Audiovox VME 9512 TS - Owner's Manual download pdf (Page 69)

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent dama-

ge to the mechanism or monitor:

After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnec-

ting and reconnecting the power.

OPERATING INSTRUCTIONS

Power On / Off

Press the /SRC button (6) on the unit (or the / POWER button (4) on the remote control) to turn the unit on. The

buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the

unit by pressing the OPEN button (1) and opening the TFT screen.

Press and hold the button to power off the unit.The monitor is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.

Volume Adjustment

To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOL but-

tons (15, 16) on the remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the

adjustment limit has been reached. The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume

level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unit

off. To program a specific turn-on volume level, turn the AUDIO control (2) to adjust the volume to the desired turn-on

volume. Push and hold the AUDIO button while the yellow speaker icon and level indication is displayed on the screen.

The unit will beep two times to confirm your turn-on volume setting.

Mute

Press the MUTE button on the front panel (8) or remote control (3) to mute the volume from the unit. Press the MUTE

button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of the audio

setup features cancels the mute function.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone.

Subject to technical changes

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 254 255

No comments

Audiovox VME 9512 TS - Owner's Manual Page 69