Tune to a channel using Tuning Wheel
Tune up and down the channel list by turning the
tuning
wheel .
Turn the tuning wheel one increment or
decremen
t to progress through a list of channels.
Continue
to turn the wheel to scroll through the list
and
display a new channel with each increment. To
select
a channel, press .
Select
a channel by remote control
When
in DIRECT entry mode the up/down arrow
buttons
on the remote control can be used
to
move up or down the channel list one channel at
a time. When in PRESET mode they can be used to
move
up or down the preset channels in the
current
bank. Each new channel will be displayed
for
your preview without leaving your current
selection.
1.
To display a new channel using the up/down
arrow
buttons, press buttons.
2.
To select a channel, press . If a channel is not
selected
within 6 seconds, the unit reverts to the
current
selection.
3.
For a fast tuning through the channel listing,
hold
down the buttons continuously.
Basic Operations
s e c t i o n 3
6
Caution: Set the volume control at a comfortable sound
level—one
that can be heard clearly without distortion.
The
Electronics Industry Association’s Consumer Electronics
Group
suggest that you avoid prolonged exposure to
excessive
noise to reduce the risk of hearing damage or loss.
Turning XMCommander On and Off
Press to power the unit on or off. When first
turned
on, the receiver will automatically tune in to
the
last channel listened to and recall the previous
settings.
Basic Channel Selection
Select a channel by number
1.
Verify that XMCommander is in DIRECT entry
mode.
DIRECT should appear in the upper right
corner
of the display. If A, B or C appears, press
until
the display says DIRECT.
2.
Enter channel number using the number keys.
Select
using presets
Your XMCommander can store up to 30 preset
channels.
They are organized into three different
groups,
or memory banks (Preset A, Preset B and
Prese
t C), each with 10 channels corresponding to the
10
number keys.
Select channel presets
Press until an A, B, or C appears in the
upper
right corner of the display. Press the number
key
corresponding to the desired preset.
Setting channel presets
1. Tune in the channel you want to register as a
preset
.
2.
Select either Preset A, Preset B or Preset C by
pressing until
an A, B, or C appears in the
upper
right corner of the display.
3. Press
and hold the number key corresponding
to
the preset you would like to set. The channel
name
and number will highlight and the audio
will
mute for 2 seconds to indicate that the
preset
is registered.
(5 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals