Audiovox Dvd3100 User's Guide download pdf (Page 10)

10

Master Volume Feature

Master Volume Feature

The Master Volume Feature allows you to select

a single device (TV or audio receiver) that the

volumecontrolalwayscontrols.Forexample,

the remote can be in TV mode while the volume

buttons control the volume on your audio receiver

instead of your TV.

Enabling the Master Volume Feature

1. Press and hold the SETUP button

until the red indicator stays on

(approximately4seconds)andthen

release the button.

2. Press and release desired device

button (TV, DVD, SAT, AUX) for the

device you wish to setup to control

the volume.

3. Press and release the

MUTE button.

4. Press and release the VOL + button.

The red indicator will blink twice and

then go off.

To test the feature put the remote in

another mode such as the TV mode

if you programmed the audio receiver

to be the Master Volume Device.

Point the remote at the audio receiver,

press and hold either the VOL + or

the VOL - button. If the audio receiver

volume changes then the remote is

programmed correctly. If the TV volume

changes and not the audio receiver,

you will have to repeat the steps above

and test again.

Disabling the Master Volume Feature

1. Press and hold the SETUP button

until the red indicator stays on

(approximately4seconds)andthen

release the button.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments