Audiovox GMRGPS User Manual download pdf (Page 19)

(1) Press Enter; an alphanumeric window appears

with a highlighted number/letter corresponding

to the character presently being used.

(2) Using the Up/Down wheel key, highlight the first

ID character desired and press Enter. The first

character changes and the cursor moves to

the second character position.

(3) Repeat step (2) for the second desired character;

the cursor moves to the third character position.

(4) Repeat step (2) for the third through eighth

character , if used; then press Enter.

(5) Using the Up/Down wheel key, highlight SAVE at the bottom of the screen and press

Enter to save the user ID code just entered. The Setup page reappears.

c. CONTRAST - Press the wheel key switch up or down to highlight the CONTRAST item;

then press Enter. A popup menu appears with a contrast level between 1 and 10 high

lighted; the level also appears in the status bar at the bottom of the display. Use the

Up/Down wheel key to select the desired display contrast for the LCD. Set the contrast at

about halfway (4 or 5) for best display. Press Enter to confirm the selection.

d. BACKLIGHT - Press the wheel key switch up or down to highlight the BACKLIGHT

item; then press Enter. A popup menu appears with the backlight duration (or none)

highlighted; the selection also appears in the status bar at the bottom of the display.

Use the Up/Down position of the wheel key switch to select the LCD backlight feature

OFF, 15 SEC, 30 SEC, 1MIN or STAY ON as indicated in the bottom status bar. Press

Enter to confirm the selection.

NOTE: Be mindful that use of the backlighting feature for longer periods of time will

deplete battery power more quickly.

e. PWR SAVE - Press the wheel key switch up or down to highlight the PWR SAVE item;

then press Enter. A popup menu appears with the current selection highlighted; the

selection also appears in the status bar at the bottom of the display. Use the Up/Down

position of the wheel key switch to select the desired power save option at OFF, SHORT

(3 seconds) or LONG (5 seconds) as indicated in the bottom status bar. Press Enter to

confirm the selection.

f. KEY BEEP - Press the wheel key switch up or down to highlight the KEY BEEP item;

then press Enter. A popup menu appears with the current selection highlighted; the

selection also appears in the status bar at the bottom of the display. Use the Up/Down

position of the wheel key switch to turn the key beep ON or OFF as indicated in the bottom

status bar. Press the Enter button to confirm the selection.

g. S/W VERSION - This menu line, when highlighted, indicates the current SoftWare

version incorporated into the unit.

Adjusting the Volume:

This adjustment applies to the radio modes only.

1. With the unit in the RDO ONLY or GPS + RADIO standby mode (standby page displayed), use

the Up/Down wheel key in the up or down position; a VOL bar graph display appears.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Comments to this Manuals

No comments

Audiovox GMRGPS User Manual Page 19

Comments to this Manuals

Related products and manuals for GPS receiver Audiovox GMRGPS