Audiovox HD588 User Manual download pdf (Page 5)

Powered HDMI Repeater

Connecting the repeater

1. Attach the HDMI cable going to your digital

video source (DVD Player, A/V Receiver, Satellite

Receiver, etc.) to the “Source” HDMI jack on the

HD588.

IMPORTANT: 24AWG cables are recommended

for all connections.

2. Attach the HDMI cable going to the video

display (HDTV, Projector, Plasma display,

etc.) to the connection on the HD588 marked

“Display.”

IMPORTANT: For 1080p signals, a maximum

length of 15m (49ft) is recommended. For 720p, a

maximum length of 40m (131ft) is recommended.

3. (Optional) If your display fails to show the image from your source, plug the

provided power supply into the repeater. Then, plug the power supply into a wall

outlet or surge protector.

Important: This power unit is intended to be correctly oriented in a vertical or ﬂ oor

mount position.

Smart LED Technology

The HD588 is a smart device and has a pair of LED indicators to let you know the

HDMI cables have been connected correctly.

The Green LED indicates the connection has been

made correctly and you are ready to enjoy your digital

video programming.

The Red LED or no LED indicates improper

connection. Reversing the cables connected to the

HD588 should correct the problem.

If both LEDs remain off and you have checked that your connections are correct,

this indicates a lack of power in the HDMI circuit. The table on the next page gives

you a guide to what each combination of indicators mean.

SOURCE

DISPLAY

Power

supply

jack

Top view

Green

LED

Red

LED

1 2 3 4 5 6 7 8

No comments

Audiovox HD588 User Manual Page 5