Audiovox AR5100 User Manual download pdf (Page 11)

uS I n g th e ar5100

11

Connecting to

a video display

1. Make sure the AR5100 and the video

display device are both turned off.

2. Connect a component video cable

(not included) to the component video

output jacks on the bottom of the

AR5100. Make sure you match the color

of each plug to a jack of the same color.

Note: You can also use a composite

video cable to connect the AR5100

to your video display. Connect the

composite video cable to the Pb (blue)

jack on the AR5100. Then connect

the other end to the composite video

input on your TV or monitor.

3. Connect the other end of the

component video cable to an available

set of component video input jacks on

the video display device. Make sure

you match the color of each plug to a

jack of the same color.

4. Turn on the video source and AR5100.

Select the correct input on the video

source to watch the signal from the

AR5100.

5. Select a video on your iPod and play it.

Important: Make sure the video settings

on your iPod are adjusted correctly to

watch video on a separate display. You

might need to remove the iPod from the

AR5100 dock to change these settings.

See the user manual that came with your

iPod for more information.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments