Audiovox Video DTT7810FM User Manual download pdf (Page 13)

System Panel Controls

DTT7810 Operation

SETTING THE CLOCK:

NOTE: All settings are preformed in standby mode.

1. Selecting 12 or 24 hour display mode:

a.) Press the “clock mode” button once. The 12H/24H and AM/PM indicator will flash.

b.) Press the “radio tune/clock set” (-) or (+) button to toggle between 12 or 24 hour modes.

2. Setting the time:

a.) Press the “clock mode” button twice. The hours and minutes will flash.

b.) Press the “radio tune/clock set”(-) button to set the hour. This will also set AM/PM.

c.) Press the “radio tune/clock set”(+) button to set the minutes.

3. Selecting the alarm type:

a.) Press the “clock mode” button three times. The alarm indicator will flash.

b.) Press the “radio tune/clock set” (-) or (+) button to toggle between the three alarm options

(Alarm/Radio and OFF). A musical note will appear to indicate the radio has been selected.

A bell will appear to indicate the alarm tone has been selected. If the alarm OFF mode is

selected there will be no indicator displayed

4. Setting the alarm time:

a.) Press the “clock mode” button four times. The alarm indicator will be displayed and the hours

and minutes will flash.

b.) Press the “radio tune/clock set” (-) button to set the hour. This will also set AM/PM.

c.) Press the “radio tune/clock set” (+) button to set the minutes.

Note: During any of the setting procedures if no buttons are pressed for four (4) seconds the

DTT7810FM will go back to standby mode.

OPERATION SELECTION:

Note: The DTT7810 default source is the DVD shuttle. When power is turned OFF the

DTT7810FM will default to the DVD shuttle.

SOURCE SELECTION:

1. DVD mode – When power is turned ON the DTT7810FM will be in DVD mode. When one of the

DVD shuttles is installed it will power ON a moment after the DTT7810FM is turned

ON.

2. TV mode – Press the “Source” button once.

– The DTT7810FM will be in TV tuner mode.

3. AV mode – Press the “Source” button twice.

– The DTT7810FM will be in AV mode. Any A/V source connected to the AV inputs on

the rear of the unit will be displayed.

4. Radio mode – Press the “Source” button three times.

– The DTT7810FM will be in Radio mode. The unit will be in the last band that was

selected (FM1, FM2, or AM)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

No comments

Audiovox Video DTT7810FM User Manual Page 13