Audiovox VXE 3010 Owner's Manual download pdf (Page 75)

Adjusting the Fader and Balance

The user can adjust front/rear fader settings, L/R balance settings, and subwoofer levels here.

1. Enter the EQ setup mode.

2. Touch the [ ] icon in the EQ interface menu.

Figure 19. Fade-Balance Adjustment Screen

Balance

This feature is used to balance the audio output levels between the left and right side of the

vehicle. Touch the ◄ or ► icons to change the balance control settings -12 (Left) to +12 (Right).

The setting can also be changed by touching screen within the grid to move the blue sphere.

Fader

This feature is used to fade the audio output levels between the front and rear of the vehicle.

Touch the ◄ or ► icons to change the fade control settings -12 (Rear) to +12 (Front). The setting

can also be changed by touching screen within the grid to move the blue sphere.

Sub (Subwoofer)

This feature is used to reduce or increase the subwoofer sound level. T

ouch the slide bar ◄ or ►

icons to adjust the subwoofer volume from -12 to +12. This setting will vary depending on the input

level setting of your subwoofer amplier.

To exit the balance-fader touch the return icon on the top left corner of the screen.

NOTE:

The EQ mode will change to ‘User’ automatically when you adjust the frequency value in all

modes besides ‘User’.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 135 136

No comments

Audiovox VXE 3010 Owner's Manual Page 75