Audiovox XMCK-10A - XM Radio Tuner Specifications download pdf (Page 12)

-12-

BASIC OPERATION

With the Xpress XM7 unit properly installed, activated and con-

nected to your home/vehicle audio system or boom box, pro-

ceed as follows:

Turning Xpress ON and OFF

Set up your Audiovox Xpress XM7 unit using the installation

instructions included in this Kit (Home Kit, or Boom Box Kit), or

with the help of a professional installer.

NOTE: Refer to Antenna Aiming during the installation pro-

cedure.

Press the Power button to turn the unit ON. When the unit turns

ON the XM7 logo will appear for 3-seconds (curved lines on

either side of the XM7 logo gradually appear) (see Figure 4)

followed by the Audiovox logo. These screens will be followed

by the active channel (see Figure 5), which defaults to the last

tuned channel setting prior to power being turned OFF. When

the unit is shut OFF the XM logo will appear and the curved lines

on either side of the XM7 logo gradually disappear.

NOTE: If this is the first time using the Xpress XM7 unit, the

screen will alternately display the preview channel screen and

a number of messages, including: “Activate Your XM7 1-800-

XM RADIO”. If not, go to channel 1 using the Rotary/Select

Knob on the Xpress XM7 unit or the CH Up/Down buttons on

the remote control.

Figure 4. XM and Audiovox Logo Power ON Screen

Figure 5. Active Channel Screen

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

No comments

Audiovox XMCK-10A - XM Radio Tuner Specifications Page 12