Audiovox CA 4051 Installation Guide download pdf (Page 12)

Manual Feature Programming - Feature Bank 2 - 4

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the parking lights will flash (3) three times.

4. Use the valet/override button to advance through each option bank. For

feature programming advance to Feature Bank 2, 3 or 4, which is (4) four,

(5) five, and (6) six parking light flashes.

5. Use the transmitter button to scroll through the selections in each

feature bank, the parking lights will flash to match the feature number.

6. Press the BRAKE to change the desired feature. The LED will flash

indicating the changed feature.

NOTE: The system will remain in feature programming mode as long as the

ignition is on, there is no time limit. To exit programming turn the IGNITION OFF.

Set Up & Programming

Transmitter Programming - Feature Bank 1

1. Turn the ignition ON.

2. Press and hold the valet/override button.

3. Within 10 seconds the parking lights will flash (3) three times.

4. Press 1 button of each transmitter you wish to program.

5. The system will respond with 1 light flash for each accepted transmitter.

6. Pressing the override button at anytime during programming will advance to

the next bank.

NOTE: The system will exit transmitter programming after 15 seconds of inactivity.

NOTE: This system has 1 button programming which programs all channels of the

system.

NOTE: The system will hold up to 4 transmitters in memory, programming a 5th

transmitter will erase the oldest transmitter in memory.

NOTE: This system has PTN - Programmed Transmitter Notification. Each time the

ignition is turned ON, the LED will flash the number of transmitters programmed to

the system.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Audiovox CA 4051 Installation Guide Page 12