Audiovox AX-2K4 User Manual download pdf (Page 5)

128-6987

5 of 6

BATTERY REPLACEMENT:

The transmitter incorporates a small LED visible through the case which

is used to indicate battery condition. You will notice a decrease in

transmitter range as the battery condition deteriorates. Transmit-

ter battery replacement is recommended at least every 10 to 12 months,

depending upon how frequently the transmitter is used.

To replace the battery:

1) Remove the small # 0 phillips head screw from the rear of the case.

2) Remove the rear cover to access the discharged battery paying

attention to the proper polarity orientation.

3) Carefully remove and properly dispose of the discharged battery.

4) Insert the new battery, close the case, then reinstall the small case

screw removed in step 1.

5) If you accidently dislodge the cir-

cuit board from the transmitter hous-

ing, be certain that the rubber mem-

brane is seated properly, and the

buttons are properly exposed from

the front view of the case, then

insert the circuit board, and return

to step #4.

QUICK REFERENCE CHART:

You can program any individual channel without reprogramming all

channels. To go directly to a particular receiver channel follow the

chart below:

CHANNEL

1 Ign. On Then

2 Ign. On Then

3 Ign. On Then

4 Ign. On Then

5 Ign. On Then

6 Ign. On Then

VALET SWITCH

Press and Release 3 Times

Press and Release 4 Times

Press and Release 5 Times

Press and Release 6 Times

Press and Release 7 Times

Press and Release 8 Times

LED

1 Flash

2 Flashes

3 Flashes

4 Flashes

5 Flashes

6 Flashes

The light will turn off when the button is released.

Caution! Always point the light away from you and the eyes of

others. This is a bright high intensity LED which should not be directed

toward or into the eyes of anyone.

1 2 3 4 5 6

128-6987 1

Comments to this Manuals

No comments

Audiovox AX-2K4 User Manual Page 5

Comments to this Manuals

Related products and manuals for Satellite Audiovox AX-2K4