Audiovox CCDF User Manual download pdf (Page 11)

128-6951

11 of 12

Surface Mount Installation:

1. Locate suitable mounting location in the rear center of the vehicle and

use the support bracket (# 2) as a template to mark and drill two 5/32”

holes on the mounting location.

2. Put the support bracket (# 2) onto the camera neck, then screw the lock

nut along the camera neck to secure the bracket (# 2) to the camera

body (# 1) in the showed direction.

3. Screw the combine screws (or tapping screws) into the holes to attach

the camera support bracket to the vehicle with the camera cable facing

downwards.

4. Place the protective cover (# 4) on the support bracket, then place the

flat washer 1 (# 6) and top cover (# 5) on the camera neck. Tighten the

top cover (# 5) to the further location along the camera neck towards

the camera body.

5. Route the camera cable thru an existing grommet into the vehicle.

6. Connect the camera cable to the extension cable and route towards the

monitor.

1 2 ... 6 7 8 9 10 11 12

No comments

Audiovox CCDF User Manual Page 11