Audiovox FR-1438-2 Owner's Manual

Model FR-1438-2Owner’s ManualF FR1438-2

To turn off the dual watch feature in the standby mode, simply press the FunctionButton (12) once.VOX SELECTION MODEThe Voice Activated Transmission (

112. Press the Up Button (10) or Down Button (11) to select the Auto option.3. Press the ENTER key to confirm your selection.If you do not press any k

Warning•Remove the batteries from the transceiver if it is not expected to be used for longperiods. This will eliminate the possibility of chemicals

13Problem Possible cause CorrectionNo transmission Weak batteries Charge or replace batterieswhile pressing Incorrect battery Polarity Install the bat

Technical Specifications:GeneralFrequency Range 462.5625 - 467.7125 MHzChannels 14Privacy Codes 38 for each main channelChannel Spacing 12.5 kHzDimens

Continuous Tone Coded Squelch System ToneFrequencies (in Hz)CTCSS Freq. Hz CTCSS Freq. Hz1 67.0 20 131.82 71.9 21 136.53 74.4 22 141.34 77.0 23 146.25

© 2000 Audiovox Corporation, Hauppauge, N.Y. 11788128-5728AApplies to Audiovox Family Radio Service Products.AUDIOVOX CORPORATION (the Company) warran

21. Battery Door2. Monitor Button3. Detachable Belt Clip4. Push-To-Talk (PTT) Button5. Antenna6. External Speaker Jack7. Built-in Speaker8. Liquid Cry

Model FR1438-2 DISPLAY1. RSSI Indicator: Receive signal strength indicator.2. TX: Icon blinks during transmission.3. Monitor Indicator: Icon appears

4CH Channel select mode (1-14)ctc Coded Tone Controlled Squelch System Sub-Channel Select ModeSC Auto Channel Scan ModedDual Channel Watch ModeUO Voic

1.Press the spring clipand slide the belt clipupwards.2. Slide the battery coverdownward.3. Insert batteries observingthe polarity symbols onthe bott

Charging the FR1438-2:Insert the charging transformer into a household electrical outlet and connect itspower jack to the socket on the rear of the ch

7Push To Talk (PTT) Button (4):Pressing and holding this button will allow you to speak to any transceiver that is setto the same channel and privacy

Function Button (12):In the standby mode, pressing this button briefly will enter the function edit mode.Pressing the button for more than 1.5 seconds

9NOTE: To communicate with other units, they must be switched to the samechannel and CTCSS subcode. To communicate with other units thatdo not have