Audiovox ADC700 Owner's Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
Details
of
the menu items are as follows. The
configuration will be reflected to the input source
currently selected.
,',
~<il-:'
The default settings are marked with
"*".
Volume
Submenus: MaxVol,lniVol
Adjustable range
(MaxVol):
-30.0dB
to
+15.0dB, +16.5dB* (5.0
dB
step)
Adjustable range
(IniVol):
Otf*, Mute, -89.5dB
to
+16.5dB (0.5
dB
step)
Sets items for volumes.
MaxVol (Maximum volume)
Sets the maximum volume level so that the volume will not
be
accidentally increased above a certain level. For
example, you can adjust the volume between -89.5 dB and
-5.0
dB (or Mute) when you set this parameterto "-5.0dB".
The volume can be increased to the maximum level when
this parameter
is
set to +16.5 dB (default).
IniVol (Initial volume)
Sets the volume at the time this unit
is
turned on. When
this parameter
is
set to
"Off',
the volume level used when
this unit was set to standby
is
applied.
If"MaxVol"
is
set to a value lower than the "lniVol" setting, the
setting for
"Max
Vol" overrides the "IniVol" setting. For
example,
if
you set "MaxVol" to
"-3D.DdB"
and "lniVol" to
"D.DdB", the volume
is
automatically set to
"-3D.DdB"
the next
time this unit is turned on.
Zone2 Volume (R-S700 only)
Submenus: MaxVol,IniVol
Adjustable range
(MaxVol):
-30.0dB
to
+15.0dB, +16.5dB* (5.0
dB
step)
Adjustable range
(IniVal):
Otf*, Mute, -89.5dB
to
+16.5dB (0.5
dB
step)
Sets the maximum volume level and initial volume level
of
Zone
2.
MaxVol (Maximum volume)
Sets the maximum volume level for Zone
2.
Refer to
"MaxVol (Maximum volume)" above.
IniVol (Initial volume)
Sets the volume at the time Zone 2
is
turned on. Refer to
"IniVol (Initial volume)" above.
'"
~<il-:'
The
"ZONE
2" indicator on the front panel display flashes when
the Zone2 volume
is
adjusted.
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Note
If"MaxVol"
is
set to a value lower than the
"[niVor'
setting. the
setting for
"Max
Vol" overrides the "IniVol" setting. For
example,
if
you set "MaxVol" to "-3D.DdB" and "lniVol" to
"D.DdB", the volume
is
automatically set
to
·'-3D.DdB" the next
time this unit
is
turned on.
Trigger Out (R-S700 only)
Submenu: Mode
Choices: Power*, Source, Manual
Use this feature to select the functions
of
the TRIGGER
OUT jack
of
this unit.
Power
Select this setting to send the voltage signals while the
selected zone
is
turned on.
Source
Select this setting to send the voltage signals while the
input source
is
selected.
Manual
Select this setting to send the voltage signals manually.
Noie
The settings that are available depend on the mode (Power,
Source,
or
Manual) that is selected.
Power: Zone
Source: Zone and Output level for each input source
Manual: Manual test
Zone
Choices:
AII*,
Main, Zone 2
Select the zone to apply the setting you selected
in
"Mode".
All
The "Mode" setting
is
applied to the Main zone and
Zone
2.
Main
The "Mode" setting
is
applied to the Main zone only.
Zone 2
The "Mode" setting
is
applied to Zone 2 only.
41
En
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 72 73

Comments to this Manuals

No comments