Audiovox ADC700 Owner's Manual Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
TROUBLESHOOTING
Remote control
Problem
Cause
Remedy
See
page
The remote control
Wrong distance or angle.
The remote control will function within a maximum
does not work nor
range
of
6 m (20 ft) and no more than 30 degrees off-
11
function properly. axis from the front panel.
Direct sunlight or lighting (from an Reposition this unit.
inverter type
of
fluorescent lamp, etc.)
is
-
striking the remote control sensor
of
this
unit.
The batteries are weak. Replace all batteries.
II
The remote
controllD
and this unit's
ID
Switch the remote control
ID
or this unit's
ID.
44
do not match.
The remote control code was not correctly
Try setting another code
of
the same manufacturer
set. using "LIST
OF
REMOTE CONTROL CODES" at 49
the end
of
this manual.
Even
if
the remote control code
is
Use the supplied remote control for the components.
correctly set, there are some models that -
do not respond
to
the remote control.
You
did not press the input selector button Press the input selector button corresponding to the
corresponding to the component you are component you are trying to control, and then press
-
trying to control. the desired remote control button(s).
The remote control is not set to the correct Set the remote control to the correct zone, the Main
46
zone. zone or Zone
2,
and then operate the remote control.
If
the remote control batteries are weak or Replace all batteries, and then set the remote control
removed, the remote control
ID
and zone ID and zone again.
44,46
will switch to the default settings (102 and
Main zone).
56 En
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 72 73

Comments to this Manuals

No comments