Audiovox 128-5495E Owner's Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22
OVERHEAD DOME LIGHTS
The Dome Lights integrated into the VOD285 are controlled by a three position slide switch. Sliding the switch to the ON position will turn
the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the
lights to turn ON and OFF with the vehicle’s interior lighting. Refer to the installation Guide for wire connections. Do not leave the vehicle
unattended with the dome light switch in the ON position, as this could result in a discharged battery.
REMOTE SENSOR
The VOD285 incorporates two infrared remote sensors which relay signals from the remote control to allow the unit to be controlled simply
by pointing its remote control at the remote sensor. This provides control of auxiliary equipment such as a Video Cassette Player. The infrared
sensor can relay signals from most manufacturer’s remote control to its respective component connected to the AV1 input. In this case
you must use the remote control supplied with the component.
WIRELESS HEADPHONES
WIRED HEADPHONES
The VOD285 includes a built-in infrared transmitter for use with Audiovox wireless headphones (Part Number IR2CHS). The volume
can then be adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within
a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation
accompanying your Audiovox wireless headphones.
There are two 1/8” headphone jacks on the VOD285 that can be used with any standard wired stereo headphones with1/8” plugs. These
jacks are controlled by the volume up/down buttons on the VOD285 remote control.
OPTIONAL ACCESSORIES
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comments to this Manuals

No comments