Audiovox AX-45 User Manual download pdf

128-6992

1 of 8

Model AX-45

Installation Manual

Keyless Entry System

With Two Auxiliary Outputs

Installation Instructions

This Unit Is Intended For Installation In Vehicles With

12 Volt Negative Ground Electrical Systems Only.

Kit Contents:

 (1) Control Module

 (2) - Three Button Transmitters

 4 Channel Code Learning Receiver

 On Board Antenna

 (1) - Multi Pin Input/Output Harness

 (1) - Three Pin Door Lock Harness

 (1) - Two Pin LED Indicator

 (1) - Two Pin Valet / Override Switch

 (1) - 15 Amp In-line Fuse Holder With Fuse

 (1) - 5 Amp In-line Fuse Holder With Fuse

 (1) - Installation Manual

 (1) - Operator's Manual

 (1) - Limited Warranty

 (2) - Window Decals

1 2 3 4 5 6 7 8

128-6992 1 of 8Model AX-45Installation ManualKeyless Entry SystemWith Two Auxiliary OutputsInstallation InstructionsThis Unit Is Intended For Install

128-6992 2 of 8This Keyless Entry System is designed to provide a convenient electronic means to gain access to the vehicle byproviding RF remote con

128-6992 3 of 8This wire is designed to output a +12VDC positive light flash output, driven by the UNITS's internal relay, to be connecteddirect

128-6992 4 of 84WHITE/BLUE Wire: Immediate, 300mA Duration of Transmit, Channel 4 Output This wire supplies a 300mA switchedoutput whenever Channel

128-6992 5 of 85terminal 87, to a fused + 12 volt source. In the rare instance that the vehicle door lock/unlock motor legs rest at + 12 voltsand sw

128-6992 6 of 86"Programming System Features" shown later in this installation guide to learn the operation of the valet/program/manualover

128-6992 7 of 8Second Turn the valet switch on then off 2 chirps = auto locks off 2 Flash pausePress transmitter Lock button to change 1 chirp = auto

No comments

Audiovox AX-45 User Manual