Audiovox APS 800a User Manual download pdf

128-6199

1 of 8

SELECTABLE FEATURES

Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be

certain to place a check mark indicating the method used in the box located on the last page of the owner's manual.

RF Programmable Features :

Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps Default

1st Door L/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl. U/L 1 Sec.

2nd Accy Lock Auto Lock On Auto Lock Off Auto Lock Off

3rd Accy. UL Auto UL Dr. Auto UL All Auto UL Off Auto UL Off

4th Headlights On Arm On Disarm On Both Off Both

5th Passive Locks Passive Active Active

6th Passive/Active Arm Passive Arm Active Arm Active Arm

7th Voltage Sense Voltage Sense Hardwire Hardwire

8th Siren/Horn Siren/Horn Siren Only Horn Only Siren/Horn

9th Horn Chirp 10mS 16mS 30mS 16mS

10th Override Method Custom Code Valet Valet

11th Two Step Unlock On Off Off

12th Chirp Delete From Tx On Off Off

To program these selectable features;

Action System Response

Turn ignition on No response

Press and release the valet switch 3 times 1 Chirp - LED 1 flash

Within 3 seconds, turn ignition Off Short chirp, then long chirp

First Then On 1 chirp = 1 second door locks

Press transmitter Lock button to change 2 chirps = 3.5 second door locks

Press transmitter Lock button to change 3 chirps = 1 sec. lock, dbl 1 sec. unlock

Second Press and release the valet switch 2 chirps = auto locks off

Press transmitter Lock button to change 1 chirp = auto locks on

Third Press and release the valet switch 3 chirps = auto unlock off

Press transmitter Lock button to change 1 chirp = auto unlock drivers door only

Press transmitter Lock button to change 2 chirps = auto unlock all doors

Fourth Press and release the valet switch 3 chirps = headlight output when arming and disarming

Press transmitter Lock button to change 4 chirps = headlight output off

Press transmitter Lock button to change 1 chirp = headlight output when arming

Press transmitter Lock button to change 2 chirps = headlight output when disarming

Fifth Press and release the valet switch 2 chirps = active locks

Press transmitter Lock button to change 1 chirp = passive locks

Sixth Press and release the valet switch 2 chirps = active arming

Press transmitter Lock button to change 1 chirp = passive arming

Seventh Press and release the valet switch 2 chirps = hardwire

Press transmitter Lock button to change 1 chirp = voltage sense

Model APS 800a

Installation Manual

1 2 3 4 5 6 7 8

128-6199 1
Model APS 800a 1

Summary of Contents

Page 1 - Model APS 800a

128-61991 of 8SELECTABLE FEATURESNote : The method of manual override can either be selected to operate from the valet switch or operate as custom cod

Page 2

128-61992 of 8Page 2orEighth Press and release the valet switch 1 chirp = siren and horn outputPress transmitter Lock button to change 2 chirps = sire

Page 3

128-61993 of 8The valet switch can be mounted to the lower side of the dash by drilling a ¼ " diameter hole in the selected location.Be sure to c

Page 4

128-61994 of 8Page 4Dark Blue Wire : DELAYED 300 mA PULSED OUTPUT / CHANNEL 3The dark blue wire pulses to ground via an independent RF channel from th

Page 5

128-61995 of 8Page 5If the vehicle uses a + 12 VDC horn switch, then connect the black w/ white trace wire to terminal 86 of the AS 9256 relay (or ane

Page 6

128-61996 of 8Page 62 Pin Blue Connector : VALET PUSH-BUTTON SWITCHRoute the grey and black wires in the 2 pin connector from the valet switch to the

Page 7

128-61997 of 8Page 7The red wire provides a positive pulse during disarming, or the drivers door pulsed positive unlock output. Connect thiswire to t

Page 8

Comments to this Manuals

No comments

Audiovox APS 800a User Manual

Browse online or download User Manual for For the car Audiovox APS 800a. Audiovox APS 800a User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Audiovox APS 800a