Audiovox CCDF User Manual download pdf (Page 7)

128-6951

7 of 12

Flush Mount Installation:

1. Select a suitable mounting location in the rear center of vehicle. Check

behind panel for wire routing access and confirm that the drill will not

damage any existing components. Use a 7/8” hole saw to drill the mount

ing hole.

2. Screw the lock nut with the threaded side toward the camera body in the

showed direction, then put the camera neck through the mounting hole

with the lens exposed and wire cable facing down.

3. Place the flat washer 1 (# 6) and top cover (# 5); tighten the top cover

(# 5) to the further location along the camera neck.

4. Hold the top cover by hand and tighten the lock nut in towards the top

cover (# 5) with the camera cable downwards.

5. Route the camera cable thru an existing grommet into the vehicle.

6. Connect the camera cable to the extension cable and route towards the

monitor.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Audiovox CCDF User Manual Page 7