Audiovox ECCO Specifications download pdf (Page 4)

4/12

128-8854

Before You Begin

Note: The distance and times provided in this

instruction guide are approximate measurements.

Charge the Battery

It takes 1.5 hours to fully charge the battery. The

charge lasts 10 hours with typical use during active

tracking or 16 days on standby.

1. Connect the charging cable into the USB port

(e4) from one of the following power sources:

AC outlet, personal computer USB port,

(see “Power Source Specications” on page 12).

2. The LCD backlight turns on, the battery strength indicator (d2)

appears on the LCD and the green LED indicator (e1) blinks.

After 5 seconds the backlight turns off.

3. When charged, the battery strength indicator (d2) is full, and

the green LED indicator (e1) light is steady.

4. Disconnect the charging cable from the USB

port (e4). The features cannot be accessed while connected to

the charging cable.

The unit displays the battery charge level in all modes, except

when the latitude/longitude/satellite information is displayed. It

is recommended to recharge when the bars across the battery

strength indicator (d2) are at 25% or less.

Power On to Ready Mode

1. Press and hold return (e3) for 2–3

seconds. The LCD backlight turns on and the

start-up screen appears.

2. The unit immediately starts acquiring GPS data,

indicated by the blinking green LED indicator (e1),

and the LCD displaying a blinking satellite icon and the message

Searching.

3. When your current position is determined, the green LED

indicator (e1) is steady, the LCD satellite icon disappears

and a sequence of messages appears:

Initializing > Ready.

Page 4

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Audiovox ECCO Specifications Page 4