Audiovox ECCO Specifications download pdf (Page 8)

8/12

128-8854

Page 8

Additional Information

Sleep Versus Off

You can manually put the unit to Sleep or turn the device Off

by using return (e3).

• To put the unit to Sleep: press and hold return

(e3) until the LCD message Sleep appears.

• To turn the unit Off (only during the Searching

mode or at start-up): press and hold return

(e3), and the message Off appears on the

LCD.

In both the Sleep mode and the Off state, the LCD

backlight and LEDs are dark. The main difference is

that in Sleep mode, the unit attempts to refresh GPS

positioning data dynamically within a period of 5

hours. The other difference is the LCD message that appears

as the unit shuts down: either Sleep or Off.

Note: After 5 hours in Sleep mode, the unit times out to the

Off state.

The unit will automatically go to Sleep if:

• You do nothing for 1 minute while one of these

messages appears on the LCD:

 Ready

 Select location

 Location 1, 2, or 3 selected

• You do nothing after Found is displayed on the

LCD for about 2 minutes.

• Searching displays on the LCD for about 2

minutes; then the message No GPS appears

on the LCD, and the red LED indicator (e1) is

steady.

• Traveling more than 2 minutes off-course

(more than 22.5°, headed in the opposite

direction, or distance (d6) is increasing) and

the red LED indicator (e1) is blinking.

• No GPS data is received for about 5 minutes,

the LCD message No GPS appears and the

red LED indicator (e1) is steady.

• No change in GPS data for about 5 minutes,

the LCD message No Movement appears, and

the red LED indicator (e1) is steady.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Audiovox ECCO Specifications Page 8