Audiovox HDP100 - Acoustic Research HD Powerlink User's Guide download pdf (Page 11)

tr o u b l e S h o o t I n G

Resetting and Linking Manually

The HDP100 transmitter and receiver come pre-linked at the factory, so

they normally don’t need to be manually paired. If you have problems

with the link, however, go through the following steps to reset and

manually link the transmitter and receiver.

power

link

d a t a

1. Unplug and completely disconnect

both units.

2. Plug both units directly into a single

wall outlet (any working outlet).

3. Reset each unit individually:

(a) Turn on the receiver and wait 10

seconds for it to warm up.

(b) Insert a toothpick into the RESET

detent on the back panel of unit.

Press down for ve seconds to start

the reset process. The LINK and

DATA indicators ash several times.

When the LINK indicator is off and

the POWER and DATA indicator are

on, the unit is nished resetting.

transmitter.

4. Press and hold the LINK buttons on

the back panels of both units. The

LINK indicator will start ashing. Keep

pressing two more seconds, then

release.

5. When the transmitter and receiver are

linked, the LINK indicator on the front

of each glow steadily (not ashing).

6. Turn both units off, then on again.

All three indicators on the front of

each unit should be illuminated. The

DATA indicator pulses during normal

operation.

power

link

d a t a

1 2 ... 6 7 8 9 10 11 12

No comments

Audiovox HDP100 - Acoustic Research HD Powerlink User's Guide Page 11