Audiovox HDP100 - Acoustic Research HD Powerlink User's Guide download pdf (Page 7)

ot h e r Se t u p op t I o n S

5

Mounting the

Receiver on the Wall

1. Find a good location on your wall

for the HDP100 receiver. If you’re

mounting it behind a TV, make sure

you have enough clearance for the

cables and the unit.

2. Mark two holes 45mm apart, one on

top of the other. Make sure they’re

plumb (straight up and down). Use the

mounting bracket as a guide.

3. Drill 1/4” (6mm) diameter holes for

the anchors where you marked.

4. Push the anchors into the wall and

make sure they’re fully seated.

5. Screw the mounting screws into the

anchors until 3–4mm is left between

the wall and the head of the screw.

6. Attach the wall mount to the HDP100

receiver using the bracket screws

that came in the package. Line up

the holes on the wall mount with the

holes on the back of the receiver.

Insert the bracket screws and tighten.

7. Place the HDP100 on the wall

mounting screws as shown and turn

90º clockwise to lock the unit in

place. If the unit is loose, rotate it 90º

counter-clockwise and pull to remove.

Tighten the screws in the wall and

remount the unit.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments