Audiovox ACAB104 Installation Manual

4 Sensor Backup Obstacle Sensing System Model: ACAB104 Installation Manual Features: • Four reversing sensors detect obstacles between 1-

9 Mounting the Speaker The speaker has three volume settings: Off, Hi, and Low. Since the speaker can be adjusted as needed, you should mount the spea

10 Mounting the Control Module Determine a dry place inside the vehicle (out of the way) to mount the control module (e.g., behind an inner body panel

11 Specifications Power Supply DC12V Current Draw <180mA Detecting Distance 1 to 7 ft Sensor Cable Length 23 ft Control Box Size 4.

12

13 © 2008 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788

1 TABLE OF CONTENTS Warnings...2 Product Descr

2 Warnings This product is intended to assist in safe driving by signaling the driver of obstacles behind the vehicle while the vehicle is in reverse.

3 Product Description This 4 Sensor Backup Obstacle Scanning System is designed to assist the driver by providing an alert when an object is behind th

4 Installation Instructions Before installing this product, take time to familiarize yourself with the items in the box and use the packing list to v

5 2. Choose one of the following mounting methods for your vehicle a. Use the sensor sleeves provided to compensate for contours in the vehicles bum

6 Choosing the Correct Sensor Sleeve 90-95Arrowhead upward The position of the sensors must be between 90°-95° perpendicular to the ground (Figure

7 Installing the Sensor Sleeve and Sensors NOTE: When installing the sensors into the sensor sleeves, push on the outer ring of the sensor only. Never

8 Installing the Power Harness 1. Wire the Power Harness to the vehicle’s reverse lamp. a) Locate the reverse lamp in the tail light assembly.