Audiovox D2016 - DVD Player - 10.2 Operations Instructions download pdf (Page 10)

Controls and displays

Number buttons and other component controls

Use the number buttons to directly select a radio frequency

(page 29

) or the tracks on a CD, etc. There are other buttons

that can be accessed after is pressed. (For example

MIDNIGHT

, etc.)

– Press to switch on/off Acoustic Calibration EQ

setting (page 33

PHASE

– Press to switch on/off Phase Control (page 33).

SIGNAL SEL

– Press to select the audio input signal of the

component to play back (page 23

S.RETRIEVER

– Press to restore CD quality sound to

compressed audio sources (page 33

CH SELECT

– Press repeatedly to select a channel, then

use

LEV +/–

to adjust the level (page 46).

LEV +/–

– Use to adjust the channel level.

MIDNIGHT

– Switches to Midnight or Loudness listening

(page 34

SPEAKERS

– See Switching the speaker terminal on

page 13.

DIMMER

– Dims or brightens the display. The brightness

can be controlled in four steps.

During ECO mode, the brightness switches between 2

levels. If the dimmest level is selected, DIMMER will be

shown on the display. (Mode other than ECO: 4 levels, ECO

mode: 2 levels)

+Favorite

– Press while a song is being played back or

stopped. The selected song is then registered in the

Favorites folder (page 38



SOURCE

Press to turn on/off other components connected to the

receiver (page 51

TV CONTROL buttons

These buttons are dedicated to control the TV assigned to the

button. Thus if you only have one TV to hook up to this

system assign it to the

button (page 52).



– Use to turn on/off the power of the TV.

INPUT

– Use to select the TV input signal.

CH +/–

– Use to select channels.

VOL +/–

– Use to adjust the volume on your TV.

ECO

Switches between ECO Mode 1/ECO Mode 2. When ECO

Mode is turned ON, the display will go dark (page 32

VOLUME +/–

Use to set the listening volume.

MUTE

Mutes/unmutes the sound.

DISP

Switches the display of this unit. The listening mode, sound

volume.

•

The Speaker System setting may or may not be displayed,

depending on the input source you have selected.

Loading the batteries

The batteries included with the unit are to check initial

operations; they may not last over a long period. We

recommend using alkaline batteries that have a longer life.

WARNING

•

Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a heater.

This can cause batteries to leak, overheat, explode or catch

fire. It can also reduce the life or performance of batteries.

CAUTION

•

Incorrect use of batteries may result in such hazards as

leakage and bursting. Observe the following precautions:

Never use new and old batteries together.

Insert the plus and minus sides of the batteries properly

according to the marks in the battery case.

Batteries with the same shape may have different

voltages. Do not use different batteries together.

When disposing of used batteries, please comply with

governmental regulations or environmental public

institution’s rules that apply in your country/area.

When inserting the batteries, make sure not to damage

the springs on the battery’s (–) terminals. This can cause

batteries to leak or overheat.

Operating range of remote control

The remote control may not work properly if:

•

There are obstacles between the remote control and the

receiver’s remote sensor.

•

Direct sunlight or fluorescent light is shining onto the

remote sensor.

•

The receiver is located near a device that is emitting

infrared rays.

•

The receiver is operated simultaneously with another

infrared remote control unit.

RECEIVER

30°

7 m

30°

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 61 62

Comments to this Manuals

No comments

Audiovox D2016 - DVD Player - 10.2 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for AV receivers Audiovox D2016 - DVD Player - 10.2