Audiovox ACC-52 User Manual download pdf (Page 7)

Hexagonal bolt

with washer base (M5 x 10)

Bracket (R)

Bracket (L)

Attach bracket (L) and bracket (R) to each side of the

unit, using the hexagonal bolts with washer base

(M5 x 10).

Mount the unit in place, using four self-tapping screws

(M5 x 12).

Use RTV (silicone sealer) on screw threads or around

the holes to prevent moisture intrusion.

Set the left and right anti-vibration springs to position

"V".

Determine the mounting location, and drill four mount-

ing holes.

PROCEDURE FOR VERTICAL INSTALLATION

NOTE: If the anti-vibration spring position has been changed and verified for vertical mounting

(as shown on page 3), start with step 2.

Never mount the unit near the fuel tank.

Drill holes 4 mm in diameter.

position "V"

Self-tapping screw

(M5 x 12)

Bracket (R)

Bracket (L)

NOTE: Use seals (A) to cover unused

mounting holes on sides of unit.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Audiovox ACC-52 User Manual Page 7